How to talk to Navōn: dictation and Read aloud
Tap the microphone and speak your message, or press Read aloud and listen to an answer. Here are the steps, the limits, and what to do when nothing is heard.

You do not have to type to use Navōn. There are two ways to use your voice in the app: dictation, where you speak and your words appear in the message box, and Read aloud, where Navōn speaks an answer back to you. This guide covers both, step by step. It is written for a parent, teacher or student using them for the first time.
Dictation: speak instead of typing
The microphone button sits beside the message box. Its label is "Speak instead of typing". It appears in Chat, and in the Image, Video and Voice tools, as well as in the Build and Agent tools and the box on the home page. Dictation fills the box with your words; it never sends the message for you.
- Open a conversation, or any tool that has a message box.
- Tap the microphone. The first time, your browser asks permission to use the microphone. Choose Allow.
- A soft rising tone plays and a small sound wave appears next to the button. On most computers the wave moves with your voice and stays flat when you are silent.
- Speak. Your words appear in the box as you say them. If something was already typed there, your speech is added after it.
- Tap the button again, which now says "Stop dictating". A falling tone plays and the text stays in the box.
- Read what was written, fix anything that was misheard, and press send when you are ready.
Choose English or Hebrew
While dictation is on, a language switch appears beside the sound wave. It offers English and Hebrew. On a wide screen both are shown and the active one is highlighted. On a phone there is a single small button that flips between them: EN and עב. Dictation starts in English, so if you want to speak Hebrew, switch before you begin. Your choice is remembered on that device. If you switch in the middle of dictating, what you have already said is kept.
Read aloud: listen to an answer
Under each answer in a conversation there is a row of small actions. One of them is Read aloud. It is useful for a child who reads slowly, for a student who learns better by listening, or for anyone whose hands are busy.
- Press Read aloud under the answer you want to hear. The label changes to show how much of the audio has loaded, as a percentage.
- When the audio is ready, it plays. The button now says Pause.
- Press it again to pause. It then says "Continue reading", and pressing it picks up from the same place rather than starting over.
- Press Read aloud under a different answer and the first one stops. Only one answer is read at a time.
Navōn reads the words of the answer, not the formatting marks. Code blocks and links are left out of the audio, and a very long answer is read only up to the first 4,000 characters (fewer for Hebrew).
Change the Read aloud voice
Open Settings and go to Preferences. The Read aloud row says it is the voice that reads Navōn's answers, in Hebrew and English. Choose a voice from the list. An answer you already listened to is read again in the new voice rather than replayed in the old one.
If nothing is heard
- If Navōn says it cannot reach your microphone, allow microphone access for the site in your browser settings and try again.
- If it says no microphone was found, check that one is connected and selected on your device.
- If it says this device cannot recognise that language, switch to the other language.
- If the microphone button is not there at all, your browser does not offer speech recognition. Typing still works everywhere.
- If the premium voice cannot be loaded, Read aloud falls back to the voice built into your browser. For Hebrew, that needs a Hebrew voice installed on the device, and if there is none you will see a message saying so.
Tips
- Speak in whole sentences with a short pause between them. Dictation writes down what the browser hears, so a quiet room helps.
- Always read the text before sending. Names, Hebrew terms and numbers are the words most often misheard.
- Dictation is useful for younger children who can talk faster than they can type, but sit with them the first time.
What it will not do
Dictation turns your speech into text using your browser's speech recognition, so how well it works depends on your device and browser. It offers English and Hebrew only; Yiddish is not offered, because browsers do not ship a recogniser for it. It does not hold a spoken conversation: you dictate, check and send, and Navōn replies in writing unless you press Read aloud. For the wider picture, see our guide to kosher AI.
Common questions
Can I talk to Navōn in Hebrew?
Yes. Tap the microphone, then use the language switch beside the sound wave to choose Hebrew (עב). Dictation offers English and Hebrew.
Does Navōn send my message when I dictate?
No. Dictation only fills the message box. You read the text, fix anything misheard, and press send yourself.
How do I make Navōn read an answer out loud?
Press Read aloud in the row of actions under the answer. Press it again to pause and once more to continue from the same place.
Why is the microphone button missing?
The button appears only when your browser supports speech recognition. If it is not there, you can still type, and Read aloud is unaffected.
Published by Navōn. How these guides are written and checked.
Read next
- Kosher AI: what it means and how to evaluate it
A complete guide to what people mean by kosher AI, why no certification exists, and the specific properties to check before a tool enters your home or classroom.
- How to start a conversation in Navōn and let Auto choose the model
A step-by-step guide to asking your first question in Navōn, what the Auto setting does, how to see which model answered, and how to pick one yourself.
- Kosher AI in Hebrew - typing, dictation and read-aloud
Using kosher AI in Hebrew: typing or dictating a question, answers laid out right to left, replies read aloud, and where machine Hebrew falls short.